(+34) 93 586 02 11 [email protected]

Anodizados Oliva

Our Services

Filing and Polishing

Specialized in manual filing and polishing aluminum castings and stainless steel.

 

CHARACTERISTICS OF THE PROCESS
Manual process done by professionals with extensive experience in this field.
BUFFING
Process to be done pieces from aluminium smelter Paar eliminating coladas and burrs. We carried out before any other surface treatment.
SMOOTHED
Process of preparing the pieces of irregularities and remnants of skin or granules of the foundry also as a prelude to other surface treatments.
POLISHED GLOSS AND MATT
Process after the limo to get a unified both in surface brightness as a mate, depending on the final decorative finish.

Anodized

The anodizing treatment is the formation of an oxide film of variable thickness …

 

CHARACTERISTICS OF THE PROCESS
It is an electrolytic process by which originates a protective layer of aluminum oxide (Al2O3), on the surface of the same.
THICK
Thickness can vary depending on the value end of the piece: 5, 10, 15 y 20 µm.

These thicknesses according to the client requests the value of each piece.
The acquired microns, dependent on the aluminum alloy and the applied process.

In our facilities we can anodize up to 20-25 µ.
We have equipment to certify the thicknesses requested.

PROPERTIES
Union with solid metal base.
Action protective face corrosion.
Action decorative.
Action electrical insulator.
Lack of toxicity.
Capacity coloring and impregnation.
Resistance to abrasion.
Maintenance is virtually zero and any neutral soap can be used to clean.
FINISHES
To achieve different decorative finishes, we make processes as pre-anodized:
· Mechanical polishing so bright, glossy, frosted.
· Blasting, shot peening

Pickling, passivation and electropolishing

Chemical treatment for removal of impurities, contamination, stains the material…
CHARACTERISTICS OF THE PROCESS
The application process electropolishing on stainless steel, makes a number of advantages to the material basis and functionality of the piece.
ASPECT
It is one of the main advantages of electropolishing because it enhances any piece machined or built in stainless steel, giving it a uniform and shiny finish. You can apply at any piece, a complicated form whatsoever.
CLEANING
Allows to get surfaces completely aseptic, as the polished electrochemical amid acid leaves the material base, free of impurities. Often used in combination with a first phase of traditional mechanical polishing and a second phase of electropolishing and passivated.
BUFFING
Being a process of dissolution of the metal base, acting intensively on the edges and burrs produced in the phases of handling the material in building parts (machining, cutting, shaping, welding, etc.). Even in areas where buffing Mechanical be impossible.

Anodized colors

A polished gloss or scotch finish, or a sandblasted finish can also be made in advance; to improve the final appearance of the piece if desired.
REALIZATION
Color anodized using organic and mineral dyes (such as gold).
FINISHES
There are colors that are more resistant to UV rays, so some are recommended for interiors and others for exteriors.

Blasting

We have a blasting installation for medium and small parts; With abrasives; glass ball and corundum.

REALIZATION
This surface treatment is performed by the impact of the abrasive by means of compressed air.
FINISHES
As a pre-anodized and electropolished finish, a homogeneous surface is achieved and small surface defects and burrs are eliminated.

Satisfaction guaranteed

Our main goal is to serve the customer both in quality and on time delivery.

Storage

Adequate technical means and with facilities of more than 1,500 m2.

External Services

External blasting service to combine with others.

Work done

A small sample of the work we do in our company, do not hesitate to contact without commitment.

Blasting

We have a blasting installation for medium and small parts; With abrasives; glass ball and corundum.

This surface treatment is performed by the impact of the abrasive by means of compressed air.

As a pre-anodized and electropolished finish, a homogeneous surface is achieved and small surface defects and burrs are eliminated.

Matte anodized

The treatment are consists of anodized in the formation of an oxide film, of varying thickness, by electrochemical means, on the surface of aluminum, which is then sealed properly to prevent rust in a natural way.

Polishing

Specialized in Lima and polished manual castings aluminum and stainless steel.

Pickling, passivation, electropolishing steel.

The electropolishing is a surface treatment which is performed through an electrolytic process by anodic dissolution of the metal surface to be treated, producing a levelling of the material basis leading to a bright finish and improve the properties of stainless steel Austenitic (non-ferrous).

Color anodized

Color anodized using organic and mineral dyes (such as gold).

A polished gloss or scotch finish, or a sandblasted finish can also be made in advance; to improve the final appearance of the piece if desired.

There are colors more resistant to UV rays so some are recommended for interiors and others for exteriors.