(+34) 93 586 02 11 [email protected]
No job is too big or too small for us to do.

Our Services

Filing and Polishing

Specialized in manual filing and polishing of aluminum castings, as well as stainless steel.

Anodized

The treatment are consists of anodized in the formation of an oxide film, of varying thickness…

Pickled, passivated, Electropolished

Chemical treatment for removing impurities, contamination, stains and material produced by welding.

Anodized colors

Color anodizing using organic and mineral dyes (such as gold color).

Chorreado

This surface treatment is carried out by the impact of the abrasive by means of compressed air.

Filing and Polishing

CHARACTERISTICS OF THE PROCESS
Manual process done by professionals with extensive experience in this field.

More details

BUFFING
Process to be done pieces from aluminium smelter Paar eliminating coladas and burrs. We carried out before any other surface treatment.

More details

SMOOTHED
Process of preparing the pieces of irregularities and remnants of skin or granules of the foundry also as a prelude to other surface treatments.

More details

POLISHED GLOSS AND MATT.
Process after the limo to get a unified both in surface brightness as a mate, depending on the final decorative finish.

More details

Anodized

CHARACTERISTICS OF THE PROCESS
It is an electrolytic process by which originates a protective layer of aluminum oxide (Al2O3), on the surface of the same.

More details

THICKNESS
Thickness can vary depending on the value end of the piece: 5, 10, 15 y 20 µm.

These thicknesses according to the client requests the value of each piece.
The acquired microns, dependent on the aluminum alloy and the applied process.

In our facilities we can anodize up to 20-25 µ.
We have equipment to certify the thicknesses requested.

More details

PROPERTIES
Union with solid metal base.
Action protective face corrosion.
Action decorative.
Action electrical insulator.
Lack of toxicity.
Capacity coloring and impregnation.
Resistance to abrasion.
Maintenance is virtually zero and any neutral soap can be used to clean.

More details

FINISHES
To achieve different decorative finishes, we make processes as pre-anodized:
· Mechanical polishing so bright, glossy, frosted.
· Blasting, shot peening

More details

Anodizado colores

CHARACTERISTICS OF THE PROCESS
After anodizing, a variety of colors can be applied. Achieving an impregnation of color on the surface of the aluminum.

More details

REALIZATION
Color anodizing using organic and mineral colorants (such as gold color).

Más detalles

FINISHES
Colors can be in glossy or matte finish.

There are colors that are more resistant to UV rays, so some are recommended for interiors and others for exteriors.

Más detalles

Electropolished

CHARACTERISTICS OF THE PROCESS
The application of the electropolishing process on stainless steel provides a series of advantages to the base material and to the functionality of the piece.

More details

ASPECT
It is one of the main advantages of electropolishing, since it enhances any piece machined or made of stainless steel, giving it a uniform and shiny finish. It can be applied to any piece, no matter how complicated its shape.

Más detalles

CLEANING
It allows to achieve totally aseptic surfaces, since electrochemical polishing in an acid medium leaves the base material free of impurities. It is often used in combination with a first stage of traditional mechanical polishing and a second stage of electropolishing and passivation.

More details

DEBURRING
As it is a process of dissolving the base metal, it acts intensely on the edges and burrs produced in the material handling phases in the construction of parts (machining, cutting, shaping, welding, etc.), even in areas where deburring mechanical would be impossible.

More details

Pickled and Passivated

CHARACTERISTICS OF THE PROCESS
Chemical treatment that eliminates impurities, contamination and welding stains.

More details

ASPECT
A homogeneous, clean and passivated surface is achieved with anti-corrosion protection with a matt appearance.

Más detalles

Blasting

CHARACTERISTICS OF THE PROCESS
We have a blasting facility for medium and small pieces; With abrasives; glass ball and corundum.

More details

REALIZATION
This surface treatment is carried out by the impact of the abrasive by means of compressed air.

Más detalles

FINISHES
As a finish prior to anodizing and electropolishing, a homogeneous surface is achieved and small surface defects and burrs are eliminated.

More details

Why choose us

Satisfaction guaranteed

Our main objective is to serve the customer both in quality and in delivery time, having a professional team with experience.

Storage

We have the appropriate technical means and facilities of more than 1,500 m2 to be able to carry out both large and small series.

External services

We can also offer an external blasting service to be able to combine it with other finishes that we offer.